The more you look at modular camera systems, such as the RB/RZ67, you realize how basic a camera really is. I had never heard of the Goodman Zone prior to Googling “3D printed camera”, and I had no idea what I was missing.

Total investment for the project is fairly minimal, and with the current market re-selling these items shouldn’t prove difficult at all if it didn’t work out. I took a chance and ordered a 65mm press lens and a 220 back. Obviously a 220 back isn’t ideal, but at 1/3 the cost of the 120 back, I was willing to take chances.

The first iteration went together nicely and the 220 back didn’t prove to be problematic with 120 film. Unfortunately, the shutter seemed to be a bit sticky and most photos didn’t come out.

I serviced the lens via a disassembly, cleaning with lighter fluid, and light lubrication with some type of specific oil I found.

These repairs fully restored the lens and the next roll came out great.

I use two apps on my phone to assist with shooting- a standard light meter app, as well as a viewfinder app to assist with composition and complete lack of finding device built in.

I still have a few plans to modify the Zone, and have recently shot 35mm pano’s that came out better than anticipated.